0.5 mm endmill

• The 0.5 mm Endmill Solution Was an Innovation

  In the world of cutting tools that is innovation, in this case with a 0.5 mm endmill! Built to last with the use of special coating material, ensuring a long life and reducing production line wearDocumentation Finally, the most advanced geometries for taking this cutting performance on to higher levels have been developed with further flute development allowing more flute space and faster chip evacuation together with a cut through solution in order eliminate tool clogging or to prevent build up of superceeding heat. Of course there are only few but very efficient and innovative areas to use in milling different kind of applications, that allow also a higher productivity rate on the overall tool.

• Precautions when using a 0.5 mm endmill

  Cutting tools always bear a risk, so care and keeping the appropriate safety procedure should never be ignored. The 0.5mm endmill was a good example of one that you must be careful with safety as any damage can lead to problems in the future Always wear gloves, goggles and earplugs Bring endmills to the recommended feed rates & speeds Keep cool when in use Store in clean protective case (to prevent chipping) NEVER use a dull or previously broken (chipped) piece.

• Correct use of the. 5 mm end mill

  The 0.5 mm endmill is way more manageable, but you need a steady hand and good setup for it to work out well! Begin with minding the apparatus to be inserted Securely during sprout and furbished In the right Location. Put a piece on the work area and use Z to adjust cutting depth in which set feeds/speeds of milling machine according with material. Run the mill and watch accuracy carefully.

Why choose Oucheng 0.5 mm endmill?

• Hea teenindusteadlikkus

  0.5 mm endmill means understanding what excellent customer service looks like.

• Rohkem kui kaheksa aastat teadus- ja arendustegevuse kogemust

  Meie Oucheng proovige kõvasulamist lõikeriistade tootmise ja turustamise spetsialiseerunud ettevõtet. Meie ettevõte on mitmeaastaste teadmistega segarühm. Meie peamised tooted on kõvasulami-, frees- ja puurimisseadmed. Samuti pakume teie klientidele kohandatud teenuseid mittestandardsete sulamite keeruliste tööriistade jaoks.

• Kvaliteetsed ja usaldusväärsed tooted

  Loaded with Imported/Domestic gauging machines And Professional Personnel To make use of the 0.5 mm endmill , guided by the Business Philosophy of "Zero Defects in item" plus "Zero Service length" designed utilizing the highest-precision Inspection Equipment to fulfill Consumer wants With Quality And quantities confidence.

• Professionaalne meeskond ja varustus

  Meie meeskond on investeerinud sellesse, et pakkuda teile kõrgeima kvaliteediga masinaid. Meil on Saksamaal, Šveitsis ja Jaapanis kuus telge ja viieteljeline Ouchengi lihvimismasin, samuti 50 komplekti silindrilisi lihvimis-/südamikuta tööriistu, lihvimis-/passiveerimistöötlus-/katmisseadmeid jne, et pakkuda täielikku protseduuri kõige täpsemate spetsifikatsioonidega toodete jaoks. .

Seotud tootekategooriad

Kas te ei leia seda, mida otsite?
Rohkemate saadaolevate toodete saamiseks võtke ühendust meie konsultantidega.