0.5 mm endmill

• The 0.5 mm Endmill Solution Was an Innovation

  In the world of cutting tools that is innovation, in this case with a 0.5 mm endmill! Built to last with the use of special coating material, ensuring a long life and reducing production line wearDocumentation Finally, the most advanced geometries for taking this cutting performance on to higher levels have been developed with further flute development allowing more flute space and faster chip evacuation together with a cut through solution in order eliminate tool clogging or to prevent build up of superceeding heat. Of course there are only few but very efficient and innovative areas to use in milling different kind of applications, that allow also a higher productivity rate on the overall tool.

• Precautions when using a 0.5 mm endmill

  Cutting tools always bear a risk, so care and keeping the appropriate safety procedure should never be ignored. The 0.5mm endmill was a good example of one that you must be careful with safety as any damage can lead to problems in the future Always wear gloves, goggles and earplugs Bring endmills to the recommended feed rates & speeds Keep cool when in use Store in clean protective case (to prevent chipping) NEVER use a dull or previously broken (chipped) piece.

• Correct use of the. 5 mm end mill

  The 0.5 mm endmill is way more manageable, but you need a steady hand and good setup for it to work out well! Begin with minding the apparatus to be inserted Securely during sprout and furbished In the right Location. Put a piece on the work area and use Z to adjust cutting depth in which set feeds/speeds of milling machine according with material. Run the mill and watch accuracy carefully.

Why choose Oucheng 0.5 mm endmill?

• Svijest o dobroj usluzi

  0.5 mm endmill means understanding what excellent customer service looks like.

• Više od osam godina iskustva u istraživanju i razvoju

  Naš Oucheng je specijalizirana tvrtka za proizvodnju i distribuciju alata za rezanje od tvrdih legura. Naša tvrtka je mješovita grupa sa višegodišnjim znanjem. Naši glavni proizvodi tvrde legure, oprema za glodanje i bušenje. Također nudimo prilagođene usluge vašim klijentima za nestandardne legure teške alate.

• Kvalitetni i pouzdani proizvodi

  Loaded with Imported/Domestic gauging machines And Professional Personnel To make use of the 0.5 mm endmill , guided by the Business Philosophy of "Zero Defects in item" plus "Zero Service length" designed utilizing the highest-precision Inspection Equipment to fulfill Consumer wants With Quality And quantities confidence.

• Profesionalni tim i oprema

  Naš tim je uložen u to da vam pruži vrhunske strojeve proizvoda najviše kvalitete. Imamo Oucheng brusilice sa šest i pet osi u Njemačkoj, Švicarskoj i Japanu, kao i 50 kompleta alata za cilindrično brušenje/bez jezgre, opremu za brušenje/pasiviranje/premazivanje, itd. kako bismo isporučili potpunu proceduru za proizvode s vrhunskim preciznim specifikacijama .

Povezane kategorije proizvoda

Niste pronašli ono što tražite?
Kontaktirajte naše konzultante za više dostupnih proizvoda.